Tarang Kinetics Private Limited
Ram Nagar, Roorkee, Haridwar, Uttarakhand
GST No. 05AAACT7621B1ZU
TrustSEAL Verified
Call 08048789912
67% Response Rate
SEND EMAIL
Product Details:
| Model | TEDV-3000 |
| Sine Force | 3000 Kgf |
| Random Force | 3000 Kgf |
| Shock Force | 6000 Kgf |
| Max Acceleration Bare Table | 85 'g' |
| System Velocity | 1.8 m/s |
| Max Displacement | 51/75 m |
| Axial Resonance | 2.6 KHz |
| Useful Frequency Range | DC to 2.8 KHz |
| THD(resistive Load) | Typically 0.5% | Typically 0.5% | Typically 0.5% | Typically 0.5% |
| Singnal to noise ratio | > 70dB | > 70dB | > 70dB | > 70dB |
| Power Efficiency | > 90% | > 90% | > 90% | > 90% |
| Input Impedance | 10 (ohm | 10 Kohm | 10 Kohm | 10 (ohm |
| Input Sensitivity | 4V ms, compatible with all standard contraIlers | |||
| Power Requirement | 15 KVA | 24 KVA | 30 KVA | 38 KVA |
| Protection Interlocks | Over Current, Over Load, Under Voltage, Module Failure, Cooling Interlock, Over Temperature Amplifier & Shaker, Current Limit, Loss of Input Phase ETC. | |||
Product Details:
| Brand | Tarang Kinetics |
| Shine Force | 200 Kgf |
| Max Acceeration Bare Table Sine | 50'g' |
| Max Displacement Peak to Peak | 25 mm |
| Axial Resonance | 3.5 KHz @ +- 5% |
| Usaeful Frequency Range | DC to 3.8 KHz |
| Mass of Armature | 4Kg |
| Dia of Armature | 140 mm |
| Insert Pattern | Center-1, 70pcd-4, 100pcd-4 |
| Payload Capacity | 20 Kg |
| Stray Magnetic Field | Less than 3m |
| Cooling Blower | 300 cfm |
| Shaker Mass | 700 kg |
| Dimension | 580x410x530 mm |
| Compresses Air Earthing | 4-6 bar |
| Signal to noise ratio | greater than 70dB |
| Power efficiency | greater than 90 % |
| Input Impedance | 10 Kohm |
| Input sensitivity | 4Vrms, compatible with all standard controllers |
| Power requirement (3 Phase) | 3 KVA |
| Protection interlocks | Over Current, Over Voltage, Under Voltage, Module Failure, Cooling Interlock, Over Temperature Ampli |
| Standard Software | Swept Sine, Random, Classical Shock, Resonance Search Track & Dwell |
| Optional Software | Random on Random, Sine on Random, Shock Response Spectrum, Transient Time history etc |
| No Of Channels | 4 Channels upgradable upto 32 channels |
The Digital Power Amplifier is a MOSFET/IGBT based Modular Type Class-D Switching interlocked with the shaker. Digital Amplifier Controller is a microcontroller, colour touch screen based user-friendly interface equipped with self-diagnostic, calibration and protection features which gets the input signal from vibration controller and controls the alternating current amplitude and frequency accordingly.
The remote operation module can be optionally used to remotely operate the complete Vibration Test System.
The Digital Vibration controller is used to simulate actual field vibration conditions at the test laboratory in a controlled manner so as to reproduce the same vibration atmosphere.
The controller is capable of full control and analysis applications for sine, resonance & dwell, random, classical shock, random-on-random, sine-on-random, shock SRS, vibro-shock and field data replication.
Our range of wide variety of head expanders and slip tables provides various possibilities to increase the effective mounting surface and orientation of the direction of the test.
Mg Alloy is used for the construction of head expanders and slip tables to ensure minimal weight thereby being more suitable to the existing force of the system.
Key features:
Efficient performance:-
User-Friendly:-
Universal Compatibility:-
We have incorporated an ARM9 microcontroller, colour touch screen based Digital amplifier Controller to control the Power Amplifier of the Vibration Test System.
This makes the operation of the system very user friendly and at the same time enhances the control and operational safety parameters of the system. It incorporates a calibration menu for quick and easy calibration of the system.
Additional Information:
Product Details:
| Sine Force Peak | 4000Kgf |
| Random Force rms | 4000Kgf |
| Shock Force | 8000Kgf |
| Max Acceleration Bare Table Sine | 801g1 |
| System Velocity Sine | 1.8/2.4 m /s |
| Max Displacement peak to peak | 51/75mm |
| Axial Resonance | 2.1KHz of (+5%) |
| Useful Frequency Range | DC to 2.4KHz |
| Mass of Armature | 48Kg |
| Dia of Armature | 440 mm |
| Insert Pattern | Center - 1 200, pcd - 8 400, pcd - 8 |
| Payload Capacity | 600 Kg |
| Stray magnetic field | Less than 1mT of 150mm above table |
| Cooling blower | 2000 cfm |
| Shaker Mass | 5400 kg |
| Dimensions | 1600x980x1240 mm |
| Utilities required | 4-6 bar compressed air, earthing |
| Signal to noise ratio | greater than 70dB |
| Power efficiency | greater than 90% |
| Input Impedance | 10 Kohm |
| Input sensitivity | 4Vrms, compatible with all standard controllers |
| Power requirement | 52 kVA and 3 phase |
| Protection interlocks | Over Current, Over Voltage, Under Voltage, Module Failure, Cooling Interlock |
| Standard Software | Swept Sine, Random, Classical Shock, Resonance Search Track & Dwell |
| Optional Software | Random on Random, Sine on Random, Shock Response Spectrum, Transient Time history etc |
| No Of Channels | 8 Channels upgradable upto 64 channels |
Additional Information:
Product Details:
| Brand | Tarang Kinetics |
| System Velocity | 1.7 m/s |
| Useful Frequency Range | 3.1 KHz |
| Max Acceleration Bare | 75 g |
| Voltage | 240 V |
Additional Information:
Product Details:
| Voltage | 410 V |
| Height | Up to 2.5 Feet |
| Width | Up to 2 Feet |
| Brand Name | Tarang Kinetics |
Product Details:
| Brand | Tarang Kinetics |
| Weight | 25-220 kg |
| Material | Mild Steel |
| Insert Pattern | 50 x 50mm matrix |
| Thickness | up to 50 mm |
| Model | THCE-400 | THCE-650 | THCE-750 | THCE-100 | THCE-120 |
| Size (mm) | Ø400 | Ø650 | Ø750 | Ø1000 | Ø1200 |
| Insert Pattern* | 50 x 50mm matrix | 100x100mm matrix | 100x100mm matrix | 100x100mm matrix | 100x100mm matrix |
| Weight (Kg) | 25 | 40 | 85 | 140 | 220 |
