Product Details:
Brand | Tarang kinetics |
Table Size | 600 x 600 mm |
Max Deviation of Specimen from Table Centre | 30 mm |
Machine Mass | 4000 kg |
Dimensions | 900x900x1500 mm |
Utilities Required | Plant air or bottled Nitrogen 6-8 bar 410V,3 -phase 50 Hz |
Safety Interlocks | Mains Input Over & Under Voltage,Phase drop,programmer pad change protection,over travel,Fail sa |
Payload Capacity | 200 Kg |
Max Payload Size | 600 x 600 mm |
Insert Pattern | 100 x 100 mm Matrix |
Stroke Length | 300 mm |
Velocity Change No Load | 7 m/s |
Velocity Change Full Load | 5 m/s |
Pulse Shape | Half Sine Optional - Sawtooth / Square wave / Trapezoidal Waveform |
Shock Rate | 1-8 shocks/min |
Price Range:
Rs. 10 Lakh to 1.5 Crore
It''s vary according to product specifications
.The machine is fabricated with the Mild steel of a very robust design to provide necessary mechanical strength and rigidness. The machine produces the shock pulses using compressed air to force the platform to impact on the elastomer pads (Half-Sine Programmer Pads)which are placed between the platform and anvil of the impact area to produce half-sine pulses, Lead pellets are placed to generate sawtooth pulses and pneumatic cylinders are used to generate square pulses. The drop height and the air pressure are responsible to generate the desired acceleration.
Shock Test Machine is a versatile test equipment to carry out shock tests in accordance with various National & International standards e.g. IS, MIL, EN, ISO, IEC, DEF & ASTM Standards.
The lifting of the platform is done by pneumatic cylinders, the drop height is determined by the desired acceleration level. In a shock test due to the rebounce action secondary shocks may occur, which are totally unacceptable by most of the test standards. Fail-safe brakes are used as a rebounce brake and as a quick release device to avoid secondary and tertiary shocks. The shock test machine is isolated from the ground by heavy duty shockers and shock absorbers. The Shock test machine is supported by a PC based intelligent Instrumentation system to control, monitor and analyze acquired shock test waveforms. The system has 4 channels to monitor the shock pulses generated which are expandable up to 16 channels.
Feature:
Customizable Reliable Solutions:- Heavy duty structure
- Adjustable drop height
- Standard 4-channel signal conditioner upgradable to 16-channel
- Adjustable Acceleration and pulse duration
- Use of Shock Amplifier can be made to increase the change in velocity & acceleration upto 30,000 ''g''
- Capable to perform tests in accordance with various standards eg. IS, MIL, DIN, ISO, EN, IEC, DEF, JS55555 & ASTM etc.
Efficient performance :- Pneumatic operation with low maintenance requirement
- Fail-safe brakes for no Secondary or Tertiary Shocks
- Shock Response Spectrum Analysis
- Shock tests in accordance with various international standards
- Shock Response Spectrum Analysis
- Shock tests in accordance with various international standards
- Highly accurate repeatability
- The ground is isolated from bumps generated
User-Friendly:- PC based control, monitoring and waveform analysis
- Various safety interlocks for safe operation
- Report generation feature
Additional Information: